The Dynamoto Pickup Spool front and rear set will suit all motorcycles fitted with swingarm pickup spools, including the Yamaha VMAX. SHOP NOW
INDIAN FTR 1200
The Dynamoto Pickup Spool front and rear set will suit all motorcycles fitted with swingarm pickup spools, including the Indian FTR 1200 SHOP NOW
Dynamoto at the Moto Expo Melbourne
The Dynamoto team attended the Melbourne Moto Expo in November 2018, where we made our exhibition debut. The Expo was held over three days and was attended by more than 25,000 people, all of who were keen motorcycle riders (the perfect market for our product). It became clear to us early in the Expo just how valuable exhibitions are for small, online businesses like ours and wanted to share our experience with you. For any small businesses considering a trade show, we at Dynamoto highly recommend it. You can only show so much online, and often it can be hard to show customers the durability and quality of a product. During the Expo, we were able to demonstrate the Dynamoto stands and received a lot of positive comments about the ease of use, functionality and premium build. It also gave those interested an opportunity to touch, feel and test out our stands for themselves. Nothing beats physically interacting with a product to get a true idea of its quality. What worked for us was the ability to demonstrate the stands. Demonstrating got more people engaged and excited to try the stands. Moving the bike on the stands attracted the attention of watchers, and we attracted big crowds over the course of the weekend. We were also encouraged because many enthusiasts spontaneously identified how the stands would be able to solve their own storage problems at home. This was a fantastic feeling, as the reason we developed our stands was recognized and acknowledged. Although the exercise for us was primarily a presentation and demonstration of our product, we were pleased to receive a number off on the spot orders over the three days. Trade shows are notorious for customer honesty which is why you will never see a dodgy brand at a trade show. It is the ultimate filter! We were really pleased to see potential customers appreciate the high-quality build and the uniqueness of our product. There were a lot of things we learnt from attending the Expo, and it proved to be a valuable research method. But mainly, it also provided us with an opportunity to get amongst the motorcycle community and talk to our consumers first hand to confirm what they wanted from our product. It was fantastic interacting with those at the Expo and the overwhelming support we received, especially when they were told one of the creators was manning the stand! We can’t wait for our next Expo, and cannot recommend them enough for other small businesses who want to break into the market. As a result of the interest generated, we have been invited to attend more industry trade shows due to the innovation of our product and the interactive/engaging stand.
AN ENGINEERS PERSPECTIVE
Don’t be at all concerned by the wheels! They were originally developed 10 years ago for (and continue to be used in) the materials handling industry for transfer tables and in the very arduous application of hand trucks (fridge trolleys, gas bottle trolleys, etc). Wheels for hand trucks cop a very hard life (up and down gutters, dragged across potholes in bitumen, cracked concrete footpaths, expansion joints, etc etc), so our application in motorcycle stands is a walk in the park for them. The wheels are actually very simple in design, but very complicated to manufacture. The wheel hub is made in a type of Polyketone (PK) composite, the bushes (one for each roller) are one-piece injection moulded Acetal which are spiral-wound onto spindles (one for each bush) that are moulded as part of the hub, and the rollers are over-moulded (over the bushes) Polyurethane - all high-performance engineering polymers. The bearings (2 in each wheel) are sealed deep groove roller bearings. The wheels require no maintenance; the only part that would be replaceable are the (2) bearings (not that we’ve ever had to replace any). Dynamoto has a free replacement warranty for 10 years on the wheels (but in reality, for a motorcycle stand you’re never going to have a problem).
One stand for many bikes - Dynamoto Double
The Double Sided Rear and Front Set is designed to suit a wide variety of double swingarm bikes. Most double swingarm bikes have a threaded feature, on both sides of the swingarm, that allows the installation of pickup spools (also known as bobbins). So if your bike can be fitted with spools, then the Double Sided Set is the option for you. An alternate option to pickup spools, for bikes with a hollow rear axle, is to install an axle slider with a spool profile. If you're not sure if the set will suit your bike, CONTACT US, we are happy to help.
INNOVATION COLLIDES Dynamoto + Motoinno TS3
Dynamoto has been busy delivering stands to motorcycle riders all over the planet, to be used under a fantastically diverse range of bikes. Over the last few months, we’ve been hearing about our customers’ rides and how Dynamoto will be used to store, shift and showcase their pride and joy, or collection. One such customer story – and a truly unique bike – popped up right around the corner from Dynamoto’s Brisbane HQ. The TS3 Prototype was developed by Colin and Ray, the founders of Motorcycle Innovation Pty Ltd (MCI), and showcases the company’s revolutionary steering and suspension system, the Triangulated Steering and Suspension System (TS3). The TS3 system has the potential to be a real game changer: it has proven via extensive empirical performance testing to deliver better turning, braking, and more advanced tuneability than conventional telescopic forks, which have been used on bikes forever. The system is lighter, more stable under braking, and up to a second faster through a single corner than a comparable traditional system: in short, the technology has the potential to change the face of motorcycles forever. TS3 technology is available via MCI’s sister company, motoinno. If you’re after a truly exclusive, “rolling work of art”, get in touch now. And don’t forget to get a couple of Dynamoto stands – don’t worry, they fit! We at Dynamoto were thrilled to find such innovative technology in our own neighbourhood, and to see our stands under the absolutely unique, one-of-a-kind TS3 Prototype. We’re excited to see where MCI and motoinno will go in the future, and can’t wait to see the first run of machines. Read more about MCI, motoinno and the TS3 system at motoinno.com.au
The advantages of OMNI-DIRECTIONAL WHEELS
Revolutionary omni-directional wheels - DESIGNED and MADE in Australia and PROVEN over years in demanding industrial applications. Under every Dynamoto stand sit Rotacaster Omni-directional wheels. Tough and durable, these unique wheels are designed for the most demanding industrial applications. * ENGINEERED COMPOSITE CONSTRUCTION is robust but still gentle on floor surfaces. * Omni-directional wheels with a FIXED AXIS are not deflected by expansion joints, cracks, or tile grout lines. * Omni-directional wheels with a fixed axis allow the load to be SAFELY levered or pivoted off the wheel WITHOUT AN UNEXPECTED LOAD SHIFT. * Omni-directional wheels with a fixed orientation CANNOT MISALIGN, and provide INSTANTANEOUS TRACKING in any horizontal direction from a stand-still or when moving. * WIDE wheels bridge expansion joints. * LARGE DIAMETER wheels mean little effort to move the load.